Hi Kadeem,
Thanks for this answer. Thus, I consider that these references are not good enough for my application and will keep the LMK03318 as preferred solution.
Regards,
Alain
Part Number: DAC38RF85 Dear Support,
I am searching a BSDL (Boundary Scan description language) model for the DAC38RF85 device. We are develop boundary scan test programs for serveral customers. So we don`t find the BSDL model on the main paige on your…
Part Number: DAC38RF85 Hi,
This is a question regarding the Transceiver type instantiation change, based on the zc706_8b10b reference design of the TI204c IP
I plan to use the Artix-7 ( XC7A100T-2FGG484I ) to interface the DAC38RF85/4 DAC (4 lanes and 1 IQ…
Other Parts Discussed in Thread: DAC38RF85 Номер детали: DAC38RF85
Привет.
Обратил внимание, что выходной сигнал после включения может иметь другой уровень.
В каждом случае я читаю регистр x05 и вижу, что ФАПЧ заблокирована.
В x06 значение PLL_LFVOLT равно…
Part Number: DAC38RF85 Hello,
We are debugging DAC38RF85 and Zynq7045, and we try to send 1990Mhz signal, LMFSHd=22210.
We use the internal PLL mode, and input clock is 2200Mhz, internal PLL locked to 5500Mhz. Now it can measure the clock frequency at …
Part Number: DAC38RF85 What is the sense of the LCM_SYSREF_OUTSEL bit in the LCMGEN register ?
The description says "Chooses between internal and external SYSREF". What value should be used for a design with an external sysref ?
Part Number: DAC38RF85 Other Parts Discussed in Thread: DAC38RF80EVM , DAC38RF82EVM , DAC38RF89EVM Dear TI Data Converter team, I would like to try DAC38RF85. Does TI offer an EVM for this specific part number? I have found several other EVMs:
DAC38RF80…
Part Number: DAC38RF85
Hello.
I'm trying to get the JESD interface to work in my custom board.
I would like to use a subclass 0, for this i set following registers
Field SYSREF_MODE in register JESD_SYSR_MODE (8.5.56) = 0 • Field DISABLE_ERR_RPT in…
Part Number: DAC38RF85 Hello.
In register 0x"43E" fild BUSWIDTH default value is 010. Description incomprehensible for me.
Selects the parallel interface width (16 or 20 bits). 0 : 20 bits 1: 16 bits
I use Xilinx JESD204Phy IP. This core use 8…
Part Number: DAC38RF85 Hello.
Instead TCM3-452X-1+, I have to use TCM2-43X+. I added 560 nH termination inductors to 1.8V in DAC output. Now, i see single tone, and 1.8V common mode.
What other changes do I need to make to the termination scheme? I am not…
