Hi Ajith,
It looks like the valid BCLK, FSYNC may not be reaching the device. That can explain the ASI_STS register that you are seeing.
1) Can you confirm that the BCLK/FSYNC signals are seen at the device pins/
2) Can you confirm that the I/O level…
Part Number: TLV320ADC5120 Other Parts Discussed in Thread: PUREPATHCONSOLE Tool/software: Hi ti team，
Using the TLV320ADC5120 in a new audio application. Does TI provide I2C and I2S configuration files?
Part Number: TLV320ADC5120 Tool/software: Hi, Team
My customer use TLV320ADC5120 in one of the audio speaker project and they try to capture the i2c timing requirement and make sure the test data match our spec.
in the i2c timing test abut fall time(Tf…
Part Number: TLV320ADC5120 Tool/software: Hi TI team，
Now we meet 2 problem，please help to solve，thanks.
1.I2S clock rise time & fall time out of range，is above 20ns
The test data of our DUT is as below，does it matter for performance？We need to add…
Part Number: TLV320ADC5120 Tool/software: Hi TI Team,
We want to use the VAD functionality of ADC5120 without any external CLK.
Is the ADC5120 supported? If yes, how to configure the register to select the internal clock.
I tried these steps and fixed…
Part Number: TLV320ADC5120 Tool/software: Hi TI Team,
In low power mode, We hope GPIO1 generates an interrupt signal to notify the host when a signal input is detected in channel 1 (differential input / PIN1&PIN2) or channel 2 (differential input …
thanks.
I check the datasheet. in fact , after power on, TLV320ADC5120 0x0B is 0x00 and 0x0C is 0x01 initially . I don't change the register value.
strange thing is when I only enable channel 2 , there is no data(seems doesn't work at all, even don…
Part Number: TLV320ADC5120 Tool/software: Hi ti team,
1. At present, when testing 5mvRMS input, THD+N is below 0.2%, but the interference is relatively large when using the spectrum, as shown in picture 1 below.
Opening the DRE according to the chip…
Part Number: TLV320ADC5120 Tool/software: Hi, Can I use TLV320ADC5120 to convert balanced audio coming out from a XLR connector? If not can you suggest a way to do it using TI components. Thanks, Punsara.
